Rain Screen Siding Installation Q&A

What is Rain Screening?

In the quest to finding better moisture management and energy efficiency, more architects and builders are installing exterior siding using rain screen installation methods. Basically, rain screening is a system, not an actual “thing”, that is used to create an air gap between the exterior siding (cladding) and a water resistant barrier that is installed over the sheathing of the structure.

By creating an air cavity between the moisture barrier and the exterior siding, this double wall construction uses the outer layer (the exterior siding) to keep the rain out, while the inner layer (an air/moisture barrier) provides thermal insulation and prevents excessive air leakage. It also allows any moisture that may pass thorough the siding to easily drain away, as well as accelerates evaporation of any residual moisture within the walls.  In the event that any water does collect behind the exterior cladding, the air gap allows it to dry, which prevents moisture build up and rot.

Rain screening is created by attaching vertical furring strips that are generally 1/4 – 3/8″ thick, by 2 – 3.5″ wide, using plywood or other treated wood strips, plastic mats or other rain screen system creating materials, over a water resistant barrier, such as tar paper.  Flashing is then installed over any penetrations and all vulnerable areas where water may pool or collect to allow it to evaporate and/or drain away.  Finally, the exterior siding is installed by adhering it to the furring strips, thus creating the air gap behind for air flow.

Be sure to contact your local building department for specific codes on rain screen installation in your area and follow all manufacturer’s recommendations to ensure the success of your project.

In these photos, 1×6 Alaskan Yellow Cedar dimensional boards were used as exterior siding over rain screening.  Simply beautiful, durable and eco-friendly.  Alaksan Yellow Cedar, also referred to as Nootka Cypress, has almost always been identified by the species label nootkatensis (so named for the Nuu-chah-nulth people of Canada).  However, the genus of the tree has been changed many times with the most recent being in the Cuypressus genus.
Alaskan Yellow Cedar Rain screen Siding

 

 

Alaskan Yellow Cedar used as siding over rain screen

photos and craftsmanship by Kreider Construction of Anacortes, WA 

Although rain screening installation costs more than more traditional U.S. exterior siding methods, it can prevent costlier problems, such as rot and decay, later on.  It also can add green benefits to your project due to the thermal insulation properties, as well as adding to the longevity of the structure and the building materials used, thus reducing waste.

www.CedarCountryLumber.com

Toll Free 866.757.6343    Fax  360.757.6343

We Ship Nationwide!