Turn Point Light Station – Stuart Island, WA

We are pleased to share with you these photos we received from our customer who was commissioned to fabricate and install historic replicas of the exterior doors for the Turn Point Light Station, located on Stuart Island in the beautiful San Juan Islands of Washington state.

map of san juan islands showing the location of Stuart Island and the Turn Point light station

Due to its dimensional stability and workability, Clear, Vertical Grain Douglas Fir was chosen for this project.  Originally built in 1893, the Turn Point Light Station has been under restoration since 2009.

turn point light station in 1904

The Light Station in 1904

Our customer writes, “The doors were fabricated last winter from grade A or better Clear, VG Douglas Fir that I purchased from you, and the pre-finished doors were absolutely beautiful.  I must confess the application of primer, and 2 coats of paint just seemed wrong!  I work from home and have a very limited 12’ X 12’ open shop and have attached a picture of the first door, the shortest one, at final glue-up.  Primer and 2 coats of paint were hand brushed in my dining room and allowed to cure over the winter in my wife’s studio.  At long last, the doors were hung, and final adjustments were made on May 10.  Two pictures show before and after. The building is being converted into a museum at this time and should be open to the public after June 30, 2016.”

Fabrication of the historical replica doors out of Clear, Vertical Grain Doug Fir

Installing the replicated doors at the Turn Point Light Station

Clear VG Fir was used to make the doors

We spend the time to source the highest quality Premium Forest Products at the best prices in Western Red Cedar, Alaskan Yellow Cedar, Douglas Fir, and other exotic and domestic soft and hardwoods.   With shipments of lumber, siding, shingles, shakes, timbers, and other specialty building materials leaving our warehouse daily all over the US, our customers value our products’ quality and our honest business practices, combined with excellent customer service and superior product knowledge.

So, before your next project, be sure to visit us!

We ship nationwide!

www.CedarCountryLumber.com

950 B Fountain Street, Burlington WA 98233

360.757.6343

AbsoluteCedar Trim

We are pleased to introduce AbsoluteCedar Trim ~an engineered Cedar trim and fascia product designed to provide years of performance on your next project. Manufactured by Woodtone and distributed to homeowners and contractors by Cedar Country Lumber, AbsoluteCedar Trim has a 30-year warranty against rot and defects.

Manufactured from Western Red Cedar, AbsoluteCedar Trim is a great choice for exterior trim

Manufactured from the highest quality Kiln Dried, Tight Knot Western Red Cedar is finger-jointed together for added stability and cost-effectiveness compared to other exterior trim products; this S1S2E product is reversible, allowing you to choose either a smooth or textured face and is manufactured from 100% renewable resources.

Each piece of AbsoluteCedar Trim is primed with 2 coats of latex primer in a factory-controlled environment to ensure an even coating on all six sides. This high-quality primer has tannin blockers and mar-resistant properties specifically designed to be used with Western Red Cedar.  And, the 30-year warranty gives you the security you need when making your decision on which trim product to use.

Applications

  • Interior & exterior trim and fascia boards
  • Window & door trim
  • Column Wraps
  • Bellyband trim
  • Garage door liner
  • Rake/frieze boards
Dimensions
  • 1×2, 1×3, 1×4, 1×6, 1×8, 1×10 & 1×12″
  • 5/4×3, 5/4×4, 5/4×6, 5/4×8, 5/4×10, 5/4×12″
  • 2×2, 2×4, 2×6, 2×8, 2×10, 2×12″
  • Available in 16′ or 20′ lengths

Before your next project, be sure to visit us!

360.757.6343

950 B Fountain Street ~ Burlington, WA  98233

www.CedarCountryLumber.com

We ship nationwide!